selbstklebende Lasercut Steinwand
Laser cut sheet of common field stone. Sheet is 12" wide by 8" high with a non-printed boarder around outside edge. Image area is 11.75" x 7.75". Comes either with self-adhesive backing or without.
Our RC Board (resin coated cardstock) has unique painting qualities. The RC Board is a plastic finish so the paints don't tend to soak in. You will get brighter colors with it.
Laser cutting is deep so that when painted powdered chalks may be added to simulate cement mortar. Photo shows the full sheet with six strips each 8 feet high (1") by 84 feet long (11-1/2"). Click on the (Enlarge) word and see a closeup of the detail on this sheet.
The strips are flexible so they can be used for curved walls. The ideal use is for making stone foundations. The RC Board can be painted with acrylic or solvent based paints or one could use Prism markers if they choose.
This material cuts easily with a X-Acto knife. The self-adhesive is permanent so care needs to be taken when applying it to the subwall material. Window and door openings can easily be cut in this material as it will not splinter or break.
NEW: A good way to paint these sheets is to spray with light coats of Automotive Gray Primer. Do this from each edge of the sheet towards the center. This is to get the gray down into the mortar lines. When the primer is dry use a dry brush technique to apply a top coat of your chosen color to the face of the rocks.